Gaggenau vg425215 domino gas hob 38 cm stainless steel

Gaggenau VG425215: Vario 400 Series gas hob for the chef who loves the flame
The VG425215 belongs to the Gaggenau Vario gas line, designed for those who want direct control of the gas flame. The 38 cm format integrates into the modular Vario system, where each element has the same standard dimensions and the same stainless steel finish. A hob that reads like a single professional block.

2 burners: optimized configuration
The arrangement of the 2 burners is designed to maximize functionality in 38 cm. The high-quality cast iron burners guarantee a stable and uniform flame, resistant to drafts. Each burner is calibrated for its size, offering the right power for every type of cooking.

Gas supply: compatibility and installation
The VG425215 is designed to operate with natural gas. The gas conversion kit (where not included) is available as an accessory. Installation must be carried out by a qualified technician in compliance with current regulations. The safety thermostat interrupts the gas supply in the event of accidental extinguishing of the flame.

Cast iron burners: professional durability
The cast iron pan supports and burners of the Vario gas hob are designed to withstand intensive use over time. Cast iron distributes heat evenly across the base of the pan and withstands high temperatures without warping. Cleaning is simple: the grids can be removed and washed separately.

Modular Vario system: create your own custom hob
The VG425215 is part of the Gaggenau Vario system: you can combine it with gas hobs of other sizes, induction, wok or steam modules to create a completely customized hob. All elements have the same height and the same finishes for a consistent and professional visual result.

FEATURES

4 kW multi-crown burner

Fully electronic flame regulation, on 12 levels.

Solid stainless steel knobs, also available in black finish, for precise and customizable control.

Precise workmanship of 3 mm thick steel

Possible free-standing or flush-mounted installation

Ultra-precise flame regulation

Electronic flame control with automatic re-ignition in the event of a switch-off

Slow cooking function

Solid pan supports with a flat surface

Perfect combination with all appliances in the Vario 400 series

1 ultra-rapid burner with 2 burners flame (165 W – 4000 W), suitable for pots with a max. ø of 28 cm.

1 normal burner with 2 flame points (165 W – 2000 W), suitable for pots with a max. ø of 28 cm.

Knobs with illuminated ring and silkscreen for the cooking zones and power levels

Ignition with a single movement.

Fully electronic control with 12 levels for precise temperature adjustment and slow cooking function

All the convenience of automatic ignition. Instant flame ignition with a single touch.

Simmer function

Cast iron grill.

Brass burners.

Electronic flame control with automatic re-ignition in case of accidental extinguishing.

Residual heat indicator.

Automatic safety shut-off

Depending on the type of installation (freestanding or flush-mounted, with or without lid), the position of the recess and the knob may vary.

Always follow the installation drawings for the knobs. If the panel is thicker than 23 mm, allow for a space at the back.

If combining several Vario 400 series appliances, the VA 420 connecting element must be used between the various appliances. Depending on the type of installation, the corresponding connecting element must be provided.

The load-bearing capacity and stability, especially in the case of thin worktops, must be supported by suitable substructures. Take into account the weight of the appliance and additional loads.

Additional instructions for flush installation:

Installation is possible in stone, synthetic, or solid wood worktops. Thermal resistance and watertightness of the cut edges must be observed. For other materials, please consult the worktop manufacturer.

The groove must be continuous and uniform to ensure correct positioning of the appliance on the gasket. Do not use a discontinuous covering.

The width of the joint may vary due to dimensional tolerances of the combinations and the cutout in the worktop.

If installing multiple appliances in individual niches, allow for a space of at least 50 mm between the niches.

Special nozzles can be ordered separately.

The electrical connection is essential for the operation of the appliance.

Air intake from above.

Installation without intermediate shelf.

Ensure that the rear wall and the slats are made of a non-flammable and heat-resistant material.

Leave a minimum distance of 50 mm. 150 mm between the hob and heat-sensitive surfaces or apply thermal insulation.

If positioned near the VL 414 downdraft extractor, the use of the AA 414 deflector is recommended to ensure maximum performance of the hob.

With a total power consumption exceeding 11 kW, local regulations regarding ventilation, room dimensions and the combination of extractor or recirculation hoods must be respected.

The minimum distance between the hob and the wall unit above it is 70 cm.

The minimum distance between the hob and the hood is indicated in the installation instructions for the extractor unit.

The appliance can be installed from above.

Appliance weight approx. 13 kg.

Total gas consumption 6.0 kW.

Total electrical consumption 15.0 W.

Connecting cable 1.4 m.