Gaggenau vi462105 induction hob 60 cm + knobs

Highlights

Solid stainless steel knobs, also available in black finish, for precise and customisable control

Flex function for combining rectangular cooking zones

Free positioning of pots and pans within the cooking zones

Perfect combination with all appliances in the Vario 400 series

TECHNICAL SPECIFICATIONS

2 Flex Induction cooking zones of 19x23 cm (2200 W, with booster 3700 W), when combined they reach the size of 38x23 cm (3300 W, with booster 3700 W), with automatic extension up to 30x30 cm (3300 W, with booster 3700 W)

2 Flex Induction cooking zones 19x23 cm (2200 W, with booster 3700 W). When combined they reach the size of 38x23 cm (3300 W, with booster 3700 W)

Operation

Knobs with illuminated ring and screen printing for the cooking zones and power levels

Electronic power control with 12 levels

User-friendly control with 2-colour display (white/orange)

Features

Flex function for rectangular zones

Frying sensor

Booster function

Stopwatch

Minutes counter

Options menu

Power Management function: electronic regulation and limitation of electrical absorption according to need

Home Connect

Integrated extraction system control (with compatible hood model)

Remote control

Remote diagnosis

Integrated digital services (Home Connect) with your wireless home network via WiFi

The operation of the Home Connect mode depends on the availability of the Home Connect service in each country. For more information, visit www.home-connect.com

Safety

Operation indicator light

Pan recognition system

2-stage residual heat indicator

Safety switch

Installation precautions

Depending on the type of installation (surface-mounted or flush-mounted), the configuration of the cutout and the position of the knob may vary

It is advisable to align the knobs and cooking zones

Always follow the drawings relating to the installation of the knobs. If the panel is thicker than 23 mm, provide a gap on the back side.

If you combine several appliances from the Vario 400 series, you must use the VA 420 connecting element between the appliances. Depending on the type of installation, the corresponding connecting element must be provided.

The load-bearing capacity and stability, especially in the case of thin worktops, must be supported by suitable substructures. Take the weight of the appliance and additional loads into account.

Additional instructions for flush installation: Installation is possible in stone, synthetic or solid wood worktops. The thermal resistance and watertightness of the cut edges must be observed. For other materials, please consult the worktop manufacturer.

The groove must be continuous and even, so that the appliance sits correctly on the gasket. Do not use a discontinuous covering

The width of the joint may vary due to dimensional tolerances of the combinations and the cut-out on the worktop

If installing several appliances in individual niches, allow a space of at least 50 mm between the niches

Only for use with ferromagnetic pans

The Wok pan - WP 400001 - cannot be used on this hob

The appliance is equipped with fixing springs that block the hob after insertion from above

Weight of the appliance approx. 16 kg

Connection values

Total absorption 7.4 kW

Connection cable length 1.5 m without plug

Consumption in standby/display OFF 0.5 W

Consumption in standby/network 1.7 W

Please check the manual to turn off the WiFi module