Gaggenau vg415115f gas hob 38 cm stainless steel

Gaggenau VG415115F: Vario 400 Series gas hob for the chef who loves the flame
The VG415115F belongs to the Gaggenau Vario gas line, designed for those who want direct control of the gas flame. The 38 cm format is integrated into the modular Vario system, where each element has the same standard dimensions and the same stainless steel finish. A hob that reads like a single professional block.

1 wok burner: optimized configuration
The arrangement of the 1 wok burner is designed to maximize functionality in 38 cm. The high-quality cast iron burners guarantee a stable and uniform flame, resistant to drafts. Each burner is calibrated for its size, offering the right power for every type of cooking.

Gas supply: compatibility and installation
The VG415115F is designed to operate with natural gas. The gas conversion kit (where not included) is available as an accessory. Installation must be carried out by a qualified technician in compliance with current regulations. The safety thermostat interrupts the gas supply in the event of accidental extinguishing of the flame.

Cast iron burners: professional durability
The cast iron pan supports and burners of the Vario gas hob are designed to withstand intensive use over time. Cast iron distributes heat evenly across the base of the pan and withstands high temperatures without warping. Cleaning is simple: the grids can be removed and washed separately.

Modular Vario system: create your own custom hob
The VG415115F is part of the Gaggenau Vario system: you can combine it with gas hobs of other sizes, induction, wok or steam modules to create a completely customized hob. All elements have the same height and the same finishes for a consistent and professional visual result.

FEATURES

Fully electronic flame regulation, on 12 levels

5.8 kW multi-crown burner

Precise workmanship of 3 mm thick steel

Possible installation on a free-standing or flush-mounted surface

Ultra-precise flame regulation

Electronic flame control with automatic re-ignition in the event of a flame failure

Slow cooking function

Perfect combination with all appliances in the Vario 400 series

Simmer function

Cast iron grill

Brass burners

Cooking zones

1 wok crown burner multiple (300 W - 5800 W), suitable for pans/pots up to Ø 32 cm

Operation

Knobs with illuminated ring and silkscreen for the cooking zones and power levels

Ignition with a single gesture

Fully electronic control with 12 levels for precise temperature adjustment and slow cooking function

All the comfort of automatic ignition

Immediate ignition of the flame with a single gesture

Safety

Electronic flame control with automatic re-ignition in the event of accidental switching off

Residual heat indication

Automatic safety switch-off

Installation precautions

Depending on the type of installation (free-standing or flush-mounted, with or without lid), the position of the built-in niche and the knob may vary

Always follow the installation drawings for the knobs. If the panel is thicker than 23 mm, allow for a gap on the back side

If combining several Vario 400 series appliances, the VA 420 connection piece must be used between the individual appliances. Depending on the type of installation, the corresponding connection piece must be provided

The load-bearing capacity and stability, especially in the case of thin worktops, must be supported by suitable substructures. Take into account the weight of the appliance and additional loads

Additional instructions for flush installation: Installation is possible in stone, synthetic or solid wood worktops. Thermal resistance and watertightness of the cut edges must be observed. For other materials, please consult the worktop manufacturer

The groove must be continuous and uniform to ensure correct positioning of the appliance on the gasket. Do not use a discontinuous covering.

The width of the joint may vary due to dimensional tolerances of the combinations and the cutout in the worktop.

If installing several appliances in individual niches, allow for a space of at least 50 mm between the niches.

Special nozzles can be ordered separately.

The electrical connection is essential for the operation of the appliance.

Air intake from above.

Installation without intermediate shelf.

Ensure that the rear wall and the strips are made of a non-flammable and heat-resistant material.

Leave a minimum distance of 50 mm. 150 mm between the hob and heat-sensitive surfaces or apply thermal insulation.

If positioned near the VL 414 hob extractor, the use of the AA 414 deflector is recommended to ensure maximum performance of the hob.

With a total power consumption exceeding 11 kW, local regulations regarding ventilation, room dimensions and the combination of extractor or recirculation hoods must be respected.

The minimum distance between the hob and the wall unit above it is 70 cm.

The minimum distance between the hob and the hood is indicated in the installation instructions for the extractor unit.

The appliance is equipped with fixing springs that block the hob after insertion from above.

Weight of the appliance approx. 14 kg.

Connection values.

Total gas absorption 5.8 kW.

Total absorption Electric 15.0 W

Connection cable length 1.4 m with Schuko plug