Jbl da1650 DA professional 16 channel amplifier grey

DA1650 16 channels

Designed to work best with any JBL Architectural Series speaker, it offers a fantastic audio experience throughout the home. JBL DA1650 can sound 8 independent zones in stereo, and takes up minimal space if positioned in a rack (only 1 1U module). The possibility of setting its outputs to bridge in mono, makes it perfect even in systems where more power is needed. The amplification stages are in class D, therefore highly efficient with limited heat dissipation. Each zone can have an independent source or share the same audio signal in all zones via the common “global audio” input. It is also possible to expand the zones, sharing an audio source between multiple amplifiers, thanks to the “global audio” output.

KEY FEATURES

Compact, it takes up the space of a single rack module, and is stackable

Possibility to bridge the outputs, for greater power requirements

Protection against both short circuits and overheating, prevents potential damage to both itself and the speakers

3 power modes (Power Mode), 12V trigger, signal-presence switch-on and always on

Local or Bus input, stereo/mono selector and output level control for each channel

TECHNICAL FEATURES

Analog audio inputs: 16 x RCA

“Global” input and output: 2 x RCA

Uscita diffusori: Connettore Phoenix per cavi spelati fino a 12AWG

12V trigger: 1 x 3.5mm (IN), 1 x 3.5mm (OUT)

Alimentazione: vaschetta Standard IEC

Selettore Ingresso Global: 8 x 2-position dip switches

Selettore A ponte/Mono: 8 x 2-position dip switches

Selettore Power Mode: 1 x 3-position switch – always on, 12V, auto sense

Potenza 8ohm (1kHz, 20ms burst, 2 channels driven, 0.5% THD max, 8Ω): 50W

Potenza 4 ohm (1kHz, 20ms burst, 2 channels driven, 0.5% THD max, 4Ω): 110W

Bridged power (8Ω Bridged, one zone driven): 185W

Frequency response: 20Hz-20kHz +/-0.5dB, at 1/8th power, all loads

THD+N (max), at rated power, 20-20kHz: <0.1%

Signal-to-noise ratio (min), A-weight, 20-20kHz, 8Ω mode: >100dB

Crosstalk between zones, at 1/8th power: -80dB

Minimum impedance: 2.7Ω

Analog input impedance: 20kΩ

Signal sense, wake up level: 1.75 mVrms

Maximum undistorted input: 4.6 Vrms

Fan noise, maximum at 1/8 power: 50dBA SPL @ 1 meter

Power supply: 100–240VAC 50-60Hz

Standby power consumption: less than 0.5W

Dimensions with feet (HxWxD): 44.5x436x323mm

Weight: 4.5kg